|
|
|
 |
|
|
The Multi-Loc System makes setting your production run faster.
It is as easy as picking up the stainless steel stop and
pressing it down at the dimension you want.
The Multi-Loc Stops allow you
to to set stops at various lengths to enable you to maximize
your raw stock without changing your set up each time. These
Multi-Loc versions of the AMS Gauging Systems allow you to
place multiple stops on the rail as close as 1" apart on the
Standard System, and 1 1/2" apart on the Heavy Duty System.
Three stops come with each assembly and either system is
available in Left-Hand & Right-Hand models. Additional
Multi-Loc stops are available. To operate, simply set the
stops to your cut list dimensions. Slide the material past the
stops you do not want to use, right to the desired setting.
Press the material against the fence and the flippers on the
stops not used will move away. Multi-Loc Systems are available
in 1/16" increments and in standard lengths of 2', 4', 6', 8'.
10', & 12'. Longer lengths can be achieved by joining rails
together.
|
|
#29022 |
6’, left-hand, English (1/16”) |
$439.00 |
|
#29032 |
6’, right-hand, English
(1/16”) |
$439.00 |
|
#29024 |
8’, left-hand, English (1/16”) |
$489.00 |
|
#29034 |
8’, right-hand, English
(1/16”) |
$489.00 |
|
#29026 |
10’, left-hand, English
(1/16”) |
$539.00 |
#29036
|
10’, right-hand, English
(1/16”) |
$539.00 |
|
#29028 |
12’, left-hand, English
(1/16”) |
$599.00 |
|
#29038 |
12’, right-hand, English
(1/16”) |
$599.00 |
|
(Longer
Multi-Loc Systems available - call for pricing) |
|
|
