Delta
15" Industrial Bench Top
Drill Press

Printable Version & Specifications
Owners Manual

Model 15-323 - New
Model 15-323R - Factory Reconditioned
Click Here For Pricing

• Factory Reconditioned units are not always in stock.
  Please call for availability.

• Click here for detailed information
  on Factory Reconditioned Delta Machinery.

Delta Industrial Complete 15" Production Drill Presses, 6" Stroke. All models include belt and pulley guard, belt and motor pulley (supplied wit 5/8" bore unless), self-locking depth stop, depth gage, 65-104 self-ejecting chuck key, motor and controls.

THE DELTA DIFFERENCE

• Extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulley are supported by four over-sized, pre-loaded, lubricated-for-life ball bearings. Massive quill is a full 2" diameter. "VS6" has the same excellent construction, PLUS an extra bearing below the spindle pulley. This fine combination of features assures freedom from chatter, long, maintenance-free life and maximum pressure at the drill point.

• Wide, test-proven speed range gives you a true 10-to-1 speed ratio. You get the exact speed you need for every drilling job on any material- 450 to 4700 rpm with a 1725 rpm motor and 300 to 3100 with an 1140 rpm motor.

• Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring loaded, rubber-tipped plunger that quickly restores correct belt tension.

• Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling... PLUS, the extra stroke required for clearing jigs and fixtures.

• Six speeds offer unbelievably wide range of speeds with a low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500 rpm- 11.8 to 1 speed ratio. You can choose an extra-slow speed for drilling very hard materials... an extra-fast speed for working soft materials... or an optimum speed for any size bit material.

• Efficient variable-speed drive lets you select any spindle speed instantly while machine is running. A self-locking cam, plus a "snubber" feature, hold speed settings constant under all load conditions. Proper belt tension is automatically maintained for full power transmission.

Top of Page

Web-site maintained by Rich Jenkins, richie@redmond-machinery.com.
This page was last updated 05/24/07.