|
|
|
 Delta
14"
Enclosed Stand
Metal Cutting Band Saw
Model 28-348F
- New
Model 28-348FR
- Factory Reconditioned
Click Here For Pricing
Model 28-348G 14" Metal-Cutting, Wood-Cutting Band Saw includes enclosed stand,
1 1/2 HP, 200-230/460V (LVC) three phase motor, guarded drip-proof motor; push
button switch, blade and belt guards, arbor & motor pulleys and V-belt, blade
guides, wood cutting blade, quick index tensioning device and instruction
manual.
THE DELTA DIFFERENCE
- Micrometer adjustment for ball bearing blade support and blade guide
blocks assure superior accuracy.
- Full 16" x 16" cast-iron table tilts 45 degrees right and 9 degrees left
for beveling operations.
- Capacity to cut stock up to 6 1/4" thick.
- 4" integral dust port for woodcutting operations.
- Quick-stop table presets with table turret stop system.
- Side take-out slot for blade permits use of solid front trunnion (not
split for blade removal) located directly under work load. Rip fence guide
rails need not be removed when changing blades.
- Lower blade guides have safe, accurate, micrometer adjustment. Lower
guides angled to support blade to within 3/4" of table work surface -
assures accurate cutting.
- Nine-spoke, precision-balanced wheels.
- Veri-Set™ index tensioning lever.
- Multi-step pulley for changing speeds for different metal cutting
operations.
- Oil bath transmission for efficient transfer of power.
|
Motor
• 1 1/2 HP
Capacity (ht. under guide)
• 6 1/4", 12 1/4" with No. 28-984 Height Attachment
installed
Motor
• 1 1/2 HP
Capacities
• Frame to blade: 13 3/4"
• Under guide and wheel: 6 1/4"
• Under guide and wheel (with 28-984 height attachment):
12 1/4"
• Speed with 1725 rpm motor: 40, 60, 85, 115, 160, 220,
335, 3000 SFPM
Table
• Size: 16" x 16"
• Groove: 3/8" x 3/4"
• Tilt: 45 degrees R, 9 degrees L
• Height from floor: 42 3/4" |
Blade
• Width: 3/4" maximum
• Length:
Maximum: 94"
Minimum: 91 1/2"
Standard: 93 1/2"
• Length (with 28-984 ht. attachment):
Maximum: 106"
Minimum: 103 1/2"
Standard: 105"
Overall Dimensions
• Height: 65 1/2"
• Width with enclosed stand: 25"
• Front to rear: 17 1/2"
Weight
• 224 lbs. |
|
|
Top of Page
Web-site maintained by Rich Jenkins, richie@redmond-machinery.com.
This page was last updated
05/24/07
. |
|
|
