|
 Delta
Horizontal Boring Machine
Model 32-350
- New
Model 32-350R
- Factory Reconditioned
Click Here For Pricing
Model 32-350 Horizontal Boring Machine with a 1HP, 3450 rpm, 115/230V, single
phase motor, (wired for 230V operation); adjustable hold-down clamp with
see-thru guard, cast-iron table with dovetailed miter gage slots, miter gage,
adjustable stock stop adjustable boring head, drill bit adapter, steel cabinet,
foot pedal, dust chute, wrenches and instruction manual.
THE DELTA DIFFERENCE
-
Adjustable hold-down clampand boring head are pneumatically
controlled by a foot pedal to keep operator's hands free. See-thru guard
protects from flying woodchips.
-
Heavy cast-iron table features dovetailed miter gage slots
for keeping miter gage secured when locked in place. Also with
standard-equipped stock stop for operations that require repetitive
drilling.
-
Loosening the nuts just before the boring head allows the
operator to quickly adjust the depth stop for
final drilling depth. Guide rails are concealed inside flexible rubber
tubing for protection against dust and chips.
-
Tough cast-iron table is mounted on dovetail ways with an
adjustable gib. The four bolts located on the right-hand side may be
adjusted to compensate for wear.
-
Aluminum Boring Head contains two adjustable spindles.
Easy-to-read scales and reference lines for accurate setting. Convenient
grease fitting accepts standard grease gun for lubricating boring head.
-
Built-in chip chut directs dust and debris away from
machine.
-
Cast-iron carriage supports motor and boring head.
-
Adjustable feed rate knob controls boring speed at which the
drill bits enter the workpiece.
-
Fabricated steel cabinet has bolt-down feet for operating
stability.
|
