Delta Model DJ-20 8" Jointer

Delta
8" Jointer
Model 37-350a (DJ-20)

Factory Reconditioned units are not always in stock.
Please call for availability.
Click here for detailed information
on Factory Reconditioned Delta Machinery.

Includes basic machine with 37-355 set of 3 HSS knives, cutterhead module, cutterhead guard, with wrenches, rabbeting ledge, tilting fence, push blocks and two pulleys.

FEATURES:

Unique parallelogram support system allows the table to move in the same area as the cutterhead when raised or lowered. This uniform close clearance to the cutting blade acts as a more efficient chip breaker.

Optional Accessories:

Table supports (4 on each table) are linear-extension spring counterbalanced; adjustment is virtually effortless despite weight of cast iron tables. Aluminum lips bolted to the main tables are replaceable to compensate for wear.

The DJ-20s 8 in. cutting capacity is ample for the majority of wood widths available. Cast iron base assures less vibration; cabinet stand completely encases motor and pulleys to protect from dust and shavings. Large panels allow easy access inside the stand if adjustment or repair is necessary. Built-in chip chute is designed for hook-up to a dust collection system is required.

Big 4 in. x 12 in. rabbeting ledge supports work securely right at the cutterhead. Note how center mounted fence acts as a rear guard when fence is moved forward to table edge.

Specially designed cast iron fence is extra long for continued support throughout the cut. Fence is center mounted and functions as a rear guard on narrow cuts. Positive stops 45 deg. in and out for accurate chamfering and beveling - scale in back measures angle set. Handy stock scale mounted at the end of fence measures jointed stock prior to planing.

Extra long infeed table provides a full 42 in. of work support. Unique diamond ribbing insures that weight is best distributed throughout the length. Height adjustment level and locking handle facilitate repetitive jointing. Handy scale measures depth of cut in English or Metric for quick reference.

Modular cutterhead provides a consistently clean cut. Three knives operate a 5500 rpm - 16,500 cuts per minute for a smooth finish. Cutterhead knives project only .020 in. above cutterhead surface to help reduce kickback of stock. Jack screw arrangmenet allows easy replacement and adjustment of individual knives. In the event the entire cutterhead has to be removed, a new module can be fitted in place without production down-time.

SPECIFICATIONS

CUTTERHEAD :

Speed - 5500 rpm, 16,5000 cuts per minute

Number of knives - 3

Diameter - 3-3/8" (86 mm)

Cutterhead - Runs on sealed, lubricated-for-life ball bearings

CUTTING CAPACITY :

Width - 8" (203 mm)

Depth - 5/8" (16 mm)

TABLE :

Length - 76-1/2" (1943 mm)

Length of rear table (outfeed) - 32" (813 mm)

Length of front table (infeed) - 42" (1067 mm)

Height from floor - 32" (813 mm)

FENCE :

Size - 5" x 36" (127 x 914 mm)

Tilts in and out - 45 deg.

Positive stops - 90 deg., 45 deg. in and out

OVERALL DIMENSIONS :

Height - 32" (813 mm)

Width - 26" (660 mm)

Length - 76" (1943 mm)

RABBETING CAPACITY :

Rabbeting Capacity - 5/8" x 8-1/16" (16 x 205 mm)

NET WEIGHT :

Net Weight - 335 Lbs. (125 Kg)

Top of Page

Web-site maintained by Rich Jenkins, richie@redmond-machinery.com.
This page was last updated 05/25/07 .