|
|
|
|
Denray
Model 2800
Downdraft Table
Click Here For
Pricing
These tables are very popular with the small
to medium sized shops. Many large shops use this model
line when sanding small items to allow each sander to have
their own station. Standard features |
|
| are 115 volt and casters and these features
can be varied. They come with 4 - swivel casters
including two that lock. When mobility is important this
model line is your best choice. If ordered with
three phase, the table will come with a magnetic
starter. The height can be requested from 29"
without casters to any reasonable height. |
Specifications:
- Size: 28 x 48"
- Height: 34½"
- Weight: 310 lbs
- CFM 1850
- Sound Level: 72 Dec
- Motor: 1HP/115 volt
|
|
General Information:
-
MOTORS are (TEFC) Totally Enclosed Fan
Cooled.
-
MOTORS for hazard locations like spray
areas are available.
-
RECEPTACLES You must bring power into them
from an electrical source outside the table.
-
CASTERS Standard on the 2800 series,
optional on all others upon request, cannot be added
later.
-
HEIGHTS may be altered, call for
information.
-
TOPS are ¾" medium density fiber
board (MDF) covered with a very durable sprayed-on
urethane cover-non-marring, soft enough not to effect
product being sanded.
-
HYDRAULIC MOTORS are available to run
fans.
-
WARRANTY one year parts and labor except
filters. Filters are standard filters and may be
purchased from Denray or other suppliers.
Top of Page
Web-site maintained by Rich Jenkins, richie@redmond-machinery.com.
This page was last updated
05/23/07
. |
|
|
