Denray
Model 2896
Downdraft Table
 

Click Here For Pricing

These tables are very popular with the small to medium sized shops. Many large shops use this model line when sanding small items to allow each sander to have their own station. Standard features are 115 volt and casters and these features can be varied. They come with 4 - swivel casters including two that lock. When mobility is important this model line is your best choice. If ordered with three phase, the table will come with a magnetic starter. The height can be requested from 29" without casters to any reasonable height. Any non-standard features must be ordered and then faxed to Denray Machine. 

• Size : 28" x 96" Height: 34½"
• Weight : 550 lbs
• CFM : 3400
• Motor : 1½HP
• Voltages : 1PH/115 volt or 3PH/230 or 460
• Sound Level : 74 Dec

General Information:

• MOTORS are (TEFC) Totally Enclosed Fan Cooled.

• MOTORS for hazard locations like spray areas are available.

• RECEPTACLES You must bring power into them from an electrical source outside the table.

• CASTERS Standard on the 2800 series, optional on all others upon request, cannot be added later.

• HEIGHTS may be altered, call for information.

• TOPS are ¾" medium density fiber board (MDF) covered with a very durable sprayed-on urethane cover-non-marring, soft enough not to effect product being sanded.

• HYDRAULIC MOTORS are available to run fans.

• WARRANTY one year parts and labor except filters.  Filters are standard filters and may be purchased from Denray or other suppliers.