|
|
|
|
Denray
Model 3696SS
Downdraft Table
For Solid Surface
Click Here For
Pricing
This table has a very unique feature: all of the inlet air
enters the table through a long slot on each side. One side
may be closed, which doubles the suction on the open side, a
great |
|
| feature when routing
or with the removal of large amounts of dust.
A highlight of this unit
is the chip deflector (shown in close up pictures), which is
mounted on hinges and held in the upright position by two
magnets. As a piece is being routed, the router chips hit
the deflector, then are sucked down into the machine. The
deflector can quickly be swung up into position or down out
of the way.
Great for house doors,
table tops, counter tops, etc. Counter sink bowls can be
positioned inside the machine, allowing unlimited access to
the counter top's edges.
|
 |
 |
Specifications:
- Size: 36" x 96", 36" tall, actual top
27" wide
- Filter: CFM 4800 After Filters
- Sound Level: 78 Decibels
- Comes with casters, three piece removable top sprayed
with a non marring rubber.
|
Options:
- Explosion Proof Motor, 3 phase
only, add - $160.00
- Muffler, reduces sound by
10-12 dbs, add - $400.00
- Auto Timer add - $300.00
|
|
General Information:
-
MOTORS are (TEFC) Totally Enclosed Fan
Cooled.
-
MOTORS for hazard locations like spray
areas are available.
-
RECEPTACLES You must bring power into them
from an electrical source outside the table.
-
CASTERS Standard on the 2800 series,
optional on all others upon request, cannot be added
later.
-
HEIGHTS may be altered, call for
information.
-
TOPS are ¾" medium density fiber
board (MDF) covered with a very durable sprayed-on
urethane cover-non-marring, soft enough not to effect
product being sanded.
-
HYDRAULIC MOTORS are available to run
fans.
-
WARRANTY one year parts and labor except
filters. Filters are standard filters and may be
purchased from Denray or other suppliers.
Top of Page
Web-site maintained by Rich Jenkins, richie@redmond-machinery.com.
This page was last updated
05/23/07
. |
|
|
