Denray
Model 7200B Grind
Downdraft Grinding Table
 

Click Here For Pricing

This table may be used for grinding steel and some non-ferrous metals. It may also be used for welding applications. This model contains two 16” x 34” flame retardant cartridge filters that clean 99.9% down to .5 micron and has water pans built over the filters to protect them from exposure to hot sparks. This extends the life of the filters. These filters are cleaned by compressed air. The contents of an air tank in the machine are released instantly into filters and pulse dust off of the filters, which falls into the drawer below. This cleaning procedure is automatically done with timers and can be done manually at any time.

• Chimney placed opposite of filter end

• Water pan

• Spark shields in center to establish two 24” x 72” work stations with swing out ends for longer work pieces

• If more than 24” is needed, the spark shield is movable and removable.

• Top is steel grate 35 lbs, per square foot

• Heavier available upon request

• Fiberglass or rubber mat for grate available

• Spun bonded filters may be washed with hot water to deep clean and extend filter life.

• Size : 48” x 72”, 36” tall
• Weight : 1200 lbs.
• CFM : 4000
• Motor : 5 HP 1PH or 3PH
• Voltages : 220 – 1PH or 230 – 460 – 575 – 3PH
• Sound Level : 80 Decibels

• Casters add - $200.00
• Muffler, reduces sound by
  10-12 dbs, add - $575.00
• Explosion Proof Motor,  3 phase only, add - $160.00

General Information:

• MOTORS are (TEFC) Totally Enclosed Fan Cooled.

• MOTORS for hazard locations like spray areas are available.

• RECEPTACLES You must bring power into them from an electrical source outside the table.

• CASTERS Standard on the 2800 series, optional on all others upon request, cannot be added later.

• HEIGHTS may be altered, call for information.

• TOPS are ¾" medium density fiber board (MDF) covered with a very durable sprayed-on urethane cover-non-marring, soft enough not to effect product being sanded.

• HYDRAULIC MOTORS are available to run fans.

• WARRANTY one year parts and labor except filters.  Filters are standard filters and may be purchased from Denray or other suppliers.