Denray
Model 9600B
Downdraft Table
 

Click Here For Pricing

This model contains 4 cartridge filters that clean to .5 micron. It features push button cleaning, which requires a button to be pushed 3-5 times a day, thereby releases a large amount of compressed air into filters. The air pulses off the dust, which drops into drawers below the filters. The drawers should be cleaned a few times a month, or as needed. These tables are designed to set end to end, allowing filters and drawers to be serviced from the front of the machine. The top, as with all other models, has a spray on rubber type finish.

• Size - 48" X 96"
• Height - 36"
• Weight - 1200 lbs
• 4800 SFM After Filters
• Motor - 5HP - 3PH OR 1PH
• Voltage - 220 - 1PH, 230 - 3PH, 460 - 3PH, and 575 - 3PH
• Sound Level - 82 Decibels

• Casters add -  $200.00
• Chimney add - $400.00
• Muffler, reduces sound by
  10-12 dbs, add - $500.00
• Auto Timer add - $300.00
• Explosion Proof Motor,  3 phase only, add - $160.00

General Information:

• MOTORS are (TEFC) Totally Enclosed Fan Cooled.

• MOTORS for hazard locations like spray areas are available.

• RECEPTACLES You must bring power into them from an electrical source outside the table.

• CASTERS Standard on the 2800 series, optional on all others upon request, cannot be added later.

• HEIGHTS may be altered, call for information.

• TOPS are ¾" medium density fiber board (MDF) covered with a very durable sprayed-on urethane cover-non-marring, soft enough not to effect product being sanded.

• HYDRAULIC MOTORS are available to run fans.

• WARRANTY one year parts and labor except filters.  Filters are standard filters and may be purchased from Denray or other suppliers.