|
|
| A) |
Change speeds by releasing belt tension with the
spring-loaded lever and repositioning the drive
belt. (4 speed MODEL 16018-1 only). |
| B) |
Increase or decrease speed without stopping the
machine using the front mounted control lever.
(Variable speed MODEL 16018-2 only). |
| |
 |
High-quality ribbed cast-iron headstock,
tailstock, and bed. |
|
|
Precision-machined bed guideways allow the
tailstock and tool rest to slide smoothly. |
|
|
Precision-machined, high-quality steel spindle,
mounted on sealed, permanently lubricated bearings. |
|
|
4-step dynamically balanced, machined cast-iron
V-pulley on the 4 speed MODEL 160-1, a single step
wide-V-pulley on the variable speed
MODEL 160-2. |
|
|
Both models equipped with plunger-type pin
indexing mechanism for reeding and fluting. |
|
|
Spindle nose is threaded 5/8" at both ends and
bored for a "Morse No.2" taper. |
|
|
Removable headstock cover for access to the
spindle and indexing mechanism. |
|
|
Powerful, North American designed, totally
enclosed fan cooled, industrial motor. |
|
|
Push-button switch on single-phase units and a
magnetic safety switch on all 3-phase units. |
SPECIFICATIONS
|
MODEL 160-1 / 16018-1
|
| |
Swing-over Bed Capacity
Swing-over Gap Capacity
Max. Distance Between Centers
Floor to Spindle Center
Nose-inboard (R.H. Thread)
Nose-outboard (L.H. Thread)
Spindle Bore
Headstock/Tailstock Taper
Tailstock Spindle Travel
Turning Speeds
Spindle Speed (RPM)
Motor M1
Motor M2
Motor M3
Motor M4
Weight |
12” (304.8 mm) /18" (457 mm)
15”(381 mm) / 21" (533 mm)
38" (965.2 mm)
41" (1041.4 mm)
1"-8 (25.4 mm)
1"-8 (25.4 mm)
5/8" (16 mm)
Morse no. 2
2" (50.8 mm)
4
850-1375-2160-3500
1 HP, 115 V, 1 Ph, 12.8 A
1 HP, 230 V, 1 Ph, 7 A
1 HP, 230 V, 3 Ph, 2.8 A
1 HP, 208 V, 3 Ph, 2.8 A
283 lbs (128 kg) |
|
SPECIFICATIONS
|
MODEL 160-2 / 16018-2
|
| |
Swing-over Bed Capacity
Swing-over Gap Capacity
Max. Distance Between Centers
Floor to Spindle Center
Nose-inboard (R.H. Thread)
Nose-outboard (L.H. Thread)
Spindle Bore
Headstock/Tailstock Taper
Tailstock Spindle Travel
Turning Speeds
Spindle Speed (RPM)
Motor M1
Motor M2
Motor M3
Motor M4
Motor M5
Weight |
12” (304.8 mm) /18" (457 mm)
15”(381 mm) / 21" (533 mm)
38" (965.2 mm)
41" (1041.4 mm)
1"-8 (25.4 mm)
1"-8 (25.4 mm)
5/8" (16 mm)
Morse no. 2
2" (50.8 mm)
Variable
500 TO 3000
1 HP, 115 V, 1 Ph, 12.8 A
1 HP, 230 V, 1 Ph, 7 A
1 HP, 230 V, 3 Ph, 2.8 A
1 HP, 208 V, 3 Ph, 2.8 A
1 HP, 600 V, 3 Ph, 1.2 A
339 lbs (154 kg) |
|
|
|
|
