|
|
|
|
 JLT
Door Stile Spreader
160B
Click Here For Pricing
JLT offers the
Redi Spreader and the
Plate Spreader for panel gluing. The major difference
between these two is the size (length and width) of the glue
applicating grid. Each glue spreader has a perforated
aluminum grid. This grid is submerged in a glue container.
Step on the foot pedal and the grid rises from the container
with glue on the grid surface. Set multiple boards on the
grid for 1-2 seconds, then place these boards in the Panel
Clamp. Both grids raise above the glue container for longer
boards. When finished gluing, spray a mist of water on the
glue surface then place the cover over the glue container.
|
 A
time saving accessory for the Door Clamp. Foot pedal
activated, two plastic profiles are designed to apply an
even, accurate spread of glue to the stile of a door thus
minimizing the potential of ‘squeeze-out’ on the door panel.
The glue container has a cover. A simple, efficient glue
applicator. |
|
|
