|
|
|
|
 JLT
Plate Spreader
138B
Click Here For Pricing
JLT offers the Redi
Spreader and the Plate
Spreader for panel gluing. The major difference between
these two is the size (length and width) of the glue
applicating grid. Each glue spreader has a perforated
aluminum grid. This grid is submerged in a glue container.
Step on the foot pedal and the grid rises from the container
with glue on the grid surface. Set multiple boards on the
grid for 1-2 seconds, then place these boards in the Panel
Clamp. Both grids raise above the glue container for longer
boards. When finished gluing, spray a mist of water on the
glue surface then place the cover over the glue container.
|
| Same quick and easy glue
application as the Redi Spreader. Designed for longer
glue-ups. The perforated aluminum grid is 8” by 48”.
Perfect for stair treads, newel posts, table tops etc. The
stainless steel glue container includes an aluminum cover
for extended glue use. |
|
|
