|
|
Click Here For
Pricing
Technical Specifications:
| Pump
motor: |
220
volts, single or three phase, 60 Hz - 1,1 KW, 10 Amp. |
| Fluid
turnover: |
1.85
gal. (7 liters) per minute |
| Operating
pressure: |
1,200 psi (80 bar) |
| Hydraulic
fluid type: |
Shell
TELLUS S32 or equivalent |
| Max.
moulding width: |
2
¾" (70mm)
Note: Placing a shop-made MDF table on top of the machine
will allow the operator to use moulding of any width. Detailed
pictures of such a table are included with the owner's manual. |
| Max.
moulding thickness: |
5 1/2" (140mm) |
| Nose
knife capacity: |
¼"
- 13/16" for NSEH version
½" - 1" for NLEH version |
| Extension
tables: |
heavy
cast iron, smooth machined surface, 30 3/4" long, one
left and one right hand side |
| Fence
rails: |
silver
anodized aluminum, 59 1/2" total length, one left and
one right hand side |
| Flip-stops:
|
aluminum,
with locking lever, four with short arm, two with long arm
(arms are reversible - can be used on left and right hand
side) |
| Table
height: |
33"
(floor to table surface) |
| Width
incl. fence rails: |
118" |
| Depth
incl. scrap chute: |
24" |
| Machine
weight: |
320
lbs. |
Standard
Features:
MORSO NLEH
series electro - hydraulic guillotine for beaded face-frames
-
-
-
with
four short-arm flip-stops and two long-arm flip-stops
-
with
left and right hand side cast iron table extensions
-
with
left and right hand side aluminum fence rails
-
with
one set of original MORSO side knives, factory ground and
honed
-
with
one ¾" wide nose knife and one 1" wide nose
knife, factory ground and honed
-
with
detailed instructions incl. parts diagrams
-
with
45 min. VHS instructional video
Warranty:
Electrical
and hydraulic parts are warranted for six months.
Mechanical parts are warranted for twelve months.
Complete MORSO warranty terms apply.
|
|
|
|
|
|
|
|
|
