|
 Powermatic
22" Planer
Model 201
Click Here For
Pricing
This 1,300 lb. heavy-duty
cast iron planer offers rock solid rigidity and accurate planing for years to
come. The hinged top allows easy access to the rollers and knives. The hood
comes standard with a 5" dust port for easy attachment to any dust collection
system. The cutterhead is complete with four high speed steel knives and turns
at 4,800 rpm producing 19,200 cuts per minute. The anti-kick back fingers and
pressure bar are located in close proximity to the cutterhead for an exceptional
finish.
The well designed infeed
and outfeed rollers are fitted with roller bearings for long roller life. The
sectional infeed and chip breaker are specially designed to allow multiple
boards to be planed at the same time. The adjustable bed roller facilitates both
rough and finish planing. The solid steel outfeed roller is machined with small
serrations to insure a smooth finish yet provide positive feeding.
The two-speed gearbox with
machined detents is quickly changed up front when switching from rough to finish
work. You may easily raise the massive ribbed cast iron, ground finished table 1
/16" with each turn of the hand wheel.
The model 201 is available
with 7-1 /2 horsepower, 3-phase 230 or 460 volt or 7-1 /2 horsepower,
single-phase motors. This planer is perfect for the small to medium shop with
continuous planing requirements.
FEATURE
|
BENEFIT
|
All cast iron
construction
1,300 lb. |
Solid,
rigid, accurate with no vibration |
|
2 feed speeds — 20/30 fpm |
Accommodates rough and fine
finish work |
Segmented infeed roller
with
sectional chip breaker |
Allows
multiple piece planing and
consistent feed and finish |
|
4-knife head — 22" wide |
Fine
finish cuts at 19,200 per minute
and widest capacity in its class |
|
Roller bearing feed
rollers |
Insure
long trouble-free use of machine |
|
Adjustable bed rollers |
Allow
smooth feeding of rough and
finished workpieces |
Heavy cast iron table
travels
on 2 large lead screws |
Offers
full support for large workpieces. 1 handle turn = 1 /16" |
Specifications
|
Model: |
201 |
| Motor
HP/Voltage/Phase |
7-1/2HP 1
and3 PH |
|
Working Width (mm/in) |
560 / 22 |
| Maximum
Depth Cut (in) |
3/16 |
|
Minimum Thickness (in) |
1/8 |
| Maximum
Thickness (in) |
9-1/4" |
|
Segmented Infeed Roller
Diameter (in) |
3 |
| Steel
Outfeed Roller Diameter (in) |
3 |
|
Feed Speeds (FPM) |
20/30 |
| Bed
Rollers Adjustable from Front |
2 |
|
Table Size (LxW/in) |
32-1/4 x 24 |
| Minimum
Length Workpiece (in) |
10 |
|
Table Height Adjust
Manual |
1 Turn = 1/16 |
| Readout
Scale |
mm/in |
|
Cutterhead Diameter (in) |
3-1 /4 |
| Number of
Knives |
4 |
|
Cutterhead Speed |
4800 |
| Table
Support |
2-column |
|
Dust Connect Diameter
(mm/in) |
125 / 5 |
| Minimum
CFM Required |
900 |
|
Weight Gross/Net (lbs) |
1430/1350 |
| Tools
Supplied |
Yes |
|
Overall Dimensions
Assembled (LxWxH/in) |
39 x 49 x 53 |
| PN
Single-Phase 230V |
1791261 |
|
PN Three-Phase 230V |
1791262 |
| PN
Three-Phase 460V |
1791280 |
|
PN Accy. Knives (4) Set |
6012179 |
| PN Accy.
Bed and Feed Roller Setting Gauge |
2230002 |
|
