|
 Powermatic
Super Shaper
Model 27S
Discontinued
However, click here to
check the availability of a used or reconditioned unit!
Standard
Equipment
- Accu-Fence
- 4" dust outlet
- 1/2" and 3/4"
interchangeable spindles
- 3 table inserts
- Wrenches
- Motor cover
- Arbor pulley and belt
- Work hold down guides
- 30" x 40"
table without mitre slot
Features
- 30" x 40"
table made from grey iron castings, rib reinforced for maximum rigidity
- Removable 3",
4-3/16" and 7" inserts made possible the use of any cutter. This
feature is especially desirable for raised panel cuts
- Table is supported by a
heavy gauge steel cabinet with clean out door
- The cast iron Accu-Fence
is precision machined and faced with hardwood blocks. Precision fine tune
adjustments is easily accomplished and locked into position with
"quick-lock" handles.
- A 4" integral dust
shroud is also standard
- Spindle is mounted in
heavy duty precision ball bearings.
- Spindles available
include: interchangeable 1/2" and 3/4" solid 3/4", 1"
and 1-1/4" spindles
- The spindle is driven
by two speed "V" pulley for spindle speeds 7,000 and 10,000 ROM,
the most recommended speeds for both large and small cutters
Specifications
| Table
size |
30"
x 40" |
| Table
height |
34"
(863.6 mm) |
| Spindle
opening diameters |
5-1/2"
(139.7 mm), 4" (101.6 mm) |
| |
2-3/4"
(69.85 mm), and 1-3/8" (34.92 mm) |
| 1"
(25.4 mm) (under nut) |
4-7/8"
(123.82 mm) |
| 1-1/4"
(31.75 mm) (under nut) |
4-7/8"
(123.82 mm) |
| 3/4"
(19.05 mm) (under nut) |
3"
(76.2 mm) |
| 1/2"
(12.7 mm) (under nut) |
2-1/4"
(57.15 mm) |
| Spindle
travel |
3"
(76.2 mm) |
| Spindle
speeds |
7000
and 10,000 RPM (733 and 1047 rad/s) |
| Largest
table opening |
7"
(177.8 mm) |
| Largest
diameter cutter |
6"
(152.4 mm) |
| Fence
size (each side) |
3-1/4"
x 12" (83 mm x 305 mm) |
| Shipping
weight |
657
lbs. (213.3 kg) |
|
