|
|
|
 Powermatic
Wood Shaper
Model 28
Discontinued
However, click here to
check the availability of a used or reconditioned unit!
Standard
Equipment
- Accu-Fence
- 4" dust outlet -
above and below the spindle
- 1-1/4" solid
spindle
- Machined table inserts
- Mitre slot in table
- Wrenches
- Electronic brake
- Pulley and belt
- Work hold down guides
- AC inverter drive
- 7-1/2 HP motor
Features
- 29" x 40"
precision ground extra thick table with mitre slot provides a rugged work
surface. Machined table inserts are removable with a maximum opening of
8"
- A larger version of the
Accu-Fence found on the Model 27. It offers the same precision fine tune
adjustment of both the infeed and outfeed fences and can be locked into
position with "quick-lock" handles
- Spindles are mounted in
heavy duty ball bearings that can be replaced quickly and inexpensively.
6" capacity under the nut
- An AC inverter drive
provides automatic spindle braking. This braking system speeds up change
over time and eliminates the problems of cutters "coasting" to a
stop
- Two 4"
connections, one above the table and one built in below the table to capture
dust.
Specifications
| Table
size |
29-1/4"
x 40" |
| Spindle
size |
1 and
1-1/4" |
| Spindle
capacity under nut |
6" |
| Spindle
travel |
4-1/2" |
| Motor |
7-1/2
HP, 3 Ph, 5 HP, 1 Ph |
| Spindle
table openings |
2-1/2",
4", 6" and 8" |
| Largest
diameter cutter |
8" |
| Brake |
AC-Inverter |
| Weight
(less crate) |
699
lbs. |
| Crated |
745
lbs. |
| Electronic
variable speed |
|
| Low |
3300 -
4700 RPM |
| Medium |
4800 -
6700 RPM |
| High |
6800 -
9500 RPM |
|
|
|
