|
|
|
 Powermatic Model 66
10" Tilting Arbor Saw
Click Here For
Pricing
MODEL 66 TABLESAW
-
Cast iron table is precision-ground and
polished to a fine mirror finish
Left tilting blade prevents stock from binding between the blade and fence,
substantially reducing the possibility of kickback
Left tilting blade also aids in making clean mitre cuts leaving any tear-out
on the bottom side of the workpiece
Wide stanced, heavy-duty, one-piece trunnion has a C-flange mount, relieving
weight at the saw arm pivot shaft and promoting easier raising and tilting
of saw blade
T-slot for standard mitre gauge
Exclusive 3VX-belt drive distributes torque more efficiently and generates
less heat while operating virtually vibration-free
Magnetic controls
Accu-Fence System ensures accuracy, available with 30 or 50 to the right
cutting capacity
Built-in dust collection port
and convenient access to the inside of the saw cabinet make for simple
clean-up
STANDARD EQUIPMENT
-
Motor with magnetic controls
Accu-Fence
4 dust port
Standard left and right cast iron extension wings, 8 each (unless
otherwise specified)
Blade guard and splitter (with anti-kickback pawls)
Arbor wrench
Motor pulley
Mitre gauge
Enclosed stand
Blade, power cord and motor cover not included
| Model 66 With: |
5HR 3Ph, 20S/230V |
5HR 3Ph, 460V |
5HP, IPh, 230V |
3HP, IPh, 230V |
| 30 Accu-Fence System* |
|
|
|
1660802K* |
| 1 50 Accu-Fence System |
1660750K |
1660807K |
1660791K |
1660760K |
| 50 Accu-Fence System* and Sliding Table |
1660793K* |
1660809K* |
1660795 K* |
1660794K* |
| 30 Accu-Fence System , and Fiout-R-Lift System |
|
|
|
1660806K* |
| 50 Accu-Fence System and Rout-R-Lift System |
1660804K |
1660810K |
1660805K |
1660803K |
| 50 Accu-Fence System and Cabinet/Table |
|
|
660813K |
1660811K |
| 50 Accu-Fence System, Cabinet/Table and Rout-R-Lift
System |
|
|
1660S14K |
1660812K |
| This unit has only one (1) standard 8 cast iron
extension wing and includes a 28 x 14tableboard |
| Model |
66 |
| Blade Diameter(In.) |
10 |
| Arbor Diameter (In.) |
5/8 |
| Maximum Depth of Cut (In.) |
3-1/8 |
| Maximum Rip Right of Blade (In.) |
50 |
| Maximum Rip Left of Blade (in.) |
12 |
| Maximum Cut Depth at 45 Degrees (In.) |
2-1/8 |
| Table in Front of Saw Blade at Maximum Cut Depth (In.) |
12 |
| Max. Dado Width (In.) |
13/16 |
| Max. Dado Diameter (In.) |
8 |
| Table Height (In.) |
34 |
| Table Size with Standard Extension (Lx W/in.) |
37-1/2 x 28 |
| Table Size without Extension (Lx W/in.) |
21-1/2x28 |
| Overall Dimensions (LxWxH/in.) |
57-5/8x32x38 |
| Motor |
5HP,3Ph, 208/230V, Prewired 208V; 5HP,3Ph,460V; j 5HP,
1Ph,230V orSHP, IPh, 230V |
| Net Weight, Saw Only (Ibs.) |
600 (Approx.) |
|
|
|
|
