•  
  220 Volts, 15 Amp, single phase
•  
  Power feeder (multi-layer industrial grade rubber belt backed up by 5 wheels) with constant speed (on purpose) of 15 Feet per minute
•  
  Automatic, motorized flush trim for: top+bottom+ both ends of the board
•  
  Technically advanced trimming by circular saw blades,
•  
  NO routers. NO wood dust, NO need for vacuum cleaners
•  
  High tension spring loaded Top+Bottom guide wheels automatically self adjust the top+bottom flush trim blades according to thickness variation of the board.
•  
  Front & back are cut by a pair of electromagnetic blade set
•  
  Hot air industrial grade production heater for pre-glued tapes of PVC, Polyester, Melamine, and wood veneer of up to 0.04" or 1.00 mm thick
•  
  Minimum thickness of the board: 7/16" , 0.43" (11 mm)
•  
  Maximum thickness of the board: 2.56" (65 mm)
•  
  Electronic temperature control. Heats up to 900 Fº in less than 2 minutes
•  
  No need for compressed air
•  
  Steel fabricated body enhances the strength with out adding extra weight
•  
  Net weight: 260 Pounds (117 Kg), Gross Weight: 365 Pounds
•  
  Dimensions: 67.7x37.4x53.1 inches (1720x950x1350 mm)
•  
  Can add casters with brake for easy moving in and out of the shop
•  
  One warranty for all spare parts ONLY
•  
  Includes a video showing how to set up, adjust, or change parts.
•  
  No need for service technician costs after warranty period
•  
  Unlimited technical support 9:00 AM to 5 PM, eastern standard time (USA) week days by calling 800-868-9663 or 212-989-9868

Top of Page

Web-site maintained by Rich Jenkins, richie@redmond-machinery.com.
This page was last updated 01/03/06 .